+26 2009 Honda Pilot Coolant Drain Plug Location 2022

If I Knew Where It Was, I Could Get.

Coolant drain well, that was the right plug, and no the dealer did not have any copper drain washers. The rear engine block plug is located above the passe. If i could get the block drained also that's almost a complete change out.

So I Got Some From Yamaha Dealer.

Draining the radiator only gets about half of the old coolant out. Tighten the radiator drain plug securely. The highest turbo coolant fitting should return coolant back to the engine towards a cold source, and one which also is a draw towards the water pump, such as the.

Ur Pilot Requires A Special Fliud I Am Sorry I Dont Remember What It Is But Ur Local Parts Store Will Have A Listing On The Fluid Type As For Changing It.it Is Easy First Jack Up The Rear Of Ur Pilot Then.

It looks like a big brake. There's also a drain bolt in the block near the downpipe/secondary o2 sensor. Pour honda all season antifreeze/coolant type 2 into the radiator up to the base of the filler.

Deleted (Procedure In Service Manual Refers To Removing An Engine Drain Bolt To Remove Fluid, Then Later.

#2 · jan 14, 2012. Car (s) '12 civic si sedan. #7 · mar 8, 2010 (edited) look above the oil drain plug on the passengerside rear of the engine block, 1/2 to the cylinder head.

There's A Plastic Drain Valve On The Bottom Of The Radiator On The Driver's Side.

Remove, drain, and reinstall the coolant reservoir. There's only one, it's above the oil filter in the recess where a block heater would screw into. In this video we are doing a honda pilot coolant change.